Mobotix MX-KEYPAD1-EXT-SV Informações Técnicas descarregar pdf (Página 88)

88/148

T24 System Manual Part 1: Installation

www.mobotix.com • [email protected]

2.4.3 Installing The Info Module T24-Info

The info ﬁeld in the info module of the T24 door station without Mx2wire+ technology is

equipped with permanent LED backlighting supplied via MxBus.

1. Ensure that the seal is ﬁtted to the info module.

Loosen the rear cover plate (using a small screwdriver

or similar tool) and remove it. You now have a clear

view of the connectors located directly on the info

module board.

Remove approximately 5 mm of insulation from each

of the cables to be connected and feed each cable

through one of the wire apertures in the housing

(piercing the rubber membrane with the cable).

Seal

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 149 150

Sem comentários

Mobotix MX-KEYPAD1-EXT-SV Informações Técnicas Página 88