Mobotix MX-KEYPAD1-EXT-SV Informações Técnicas descarregar pdf (Página 78)

78/148

T24 System Manual Part 1: Installation

www.mobotix.com • [email protected]

2.3.8 Mechanical Anti-Theft Protection Lock

In the default conﬁguration of the door station, anti-theft protection is not activated in the

frame. This allows modules that have already been integrated to be removed again during

the installation, just using the special key that has been supplied.

Insert the key into the opening provided and apply light pressure. The red retaining collars

on the left or lower side of the frame (depending on whether the frame is mounted vertically

or horizontally) loosen and release the modules.

Notes

To activate the mechanical anti-theft protection lock, the module above the red

rotary button (triple frame: center module, double frame: upper/left module) must

be released from the frame.

Important: After the installation, check the wiring (see Section 2.8.1) and only then

activate the anti-theft protection lock.

D>$1&*< 6$4

Retaining tabs

Red rotary button

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 149 150

Sem comentários

Mobotix MX-KEYPAD1-EXT-SV Informações Técnicas Página 78