Mobotix MX-KEYPAD1-EXT-SV Informações Técnicas descarregar pdf (Página 61)

61/148

Overview: Connection And Wiring Diagrams

www.mobotix.com • [email protected]

Step 2: Install And Connect The T24-DoorMaster

Install the T24-DoorMaster in a in-wall socket on the wall behind the door station (inside

the building). Besides the in-wall socket, only two holes are required for the entire cabling.

Hole A

Use a long drill bit to drill a hole from the door station downwards at an angle,

through the brickwork to the in-wall socket of the T24-DoorMaster on the interior

wall surface. Insert a 4-wire cable for MxBus and the anti-theft protection (see Section

2.1.4, Recommendation For Cabling).

Hole B

Use a shorter drill bit to drill a hole through the brickwork from the door lock/

door opener to the in-wall socket of the T24-DoorMaster. Feed the connectors for the

door opener, door contact and door lock switch through this hole (see Section 2.5, Installing

The T24-DoorMaster).

Note

Please contact a specialist (e.g. a locksmith) for the installation and selection of

any components that may be required (door opener, magnetic sensors). Door

openers and door contacts are available as accessories from other suppliers (e.g.

www.assaabloy.com).

Door

T24-DoorMaster

Hole B

Hole A

Wall

Indoors

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 149 150

Sem comentários

Mobotix MX-KEYPAD1-EXT-SV Informações Técnicas Página 61