Mobotix S15 Especificações descarregar pdf (Página 96)

96/164

S15 Camera Manual: Installation

www.mobotix.com • [email protected]

2.4 Installing the S15M FlexMount

2.4.1 Connecting Network Cables and Additional S15M Cables

As the S15M is mounted in the intended position with the front panel behind, the housing

cover cannot be removed after mounting. All the cables to be connected there (Ethernet

installation cable, MxBus, microphone, speaker) are then no longer accessible and the

connector for the network patch cable can only be accessed with diculty. The triple lock

for connecting the MiniUSB cable can no longer be opened either. This is why you should

connect the camera network cables, a MiniUSB cable, if required, and additional cables

(MxBus, microphone, speaker)

before mounting the camera

as described in

Section 2.5,

«Network and Power Connection, Additional Cables»

2.4.2 Attaching the S15M Camera Housing

Use the drilling template supplied (at the end of this manual) to mark the position of

the drilling holes for the camera. Make sure that it is not scaled down when printing or

copying the drilling template.

Caution

Make sure the camera is mounted on an even surface. If this is not the case, there

is a risk that the housing plate will move and the housing will begin to leak.

The torque for the

housing cover screws

is 0.4Nm.

Pressure compen-

sations

Lens with dome

Base plate

R L

LEDs

MicroSD Card

Keys

Triple cable retainer

Bayonet catch

S15Mhousing cover

1 2

LED defaults:

1 Power (on), Error (ashes)

2 Recording (ashes)

The drilling templates

can be found at the

end of the manual

Always print or copy

drilling templates in

their original size

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 163 164

Comentários a estes Manuais

Sem comentários

Mobotix S15 Especificações Página 96

Comentários a estes Manuais

Manuais e produtos relacionados com Câmaras de segurança Mobotix S15