Mobotix S15 Especificações descarregar pdf (Página 75)

75/164

Determining the Installation Position

www.mobotix.com • [email protected]

Greater wall thicknesses can also be bridged by attaching several extensions. The sensor

module is secured from behind by a nut and a locknut.

Wall Installation with 15° Wedge for Image Optimization

Wall mounting with lenses tilting downwards is recommended in many cases for optimiz

ing image quality. In particular for wall installations that must be carried out at greater

heights for technical or other reasons (over doors, windows, etc.,) adding a slight tilt to

the camera, and thus also the lens, will return better results, as the center of the lens is

then focused more directly on the center of activity in the room (optimal utilization of lens

capabilities). MOBOTIX therefore oers easy to install mounting accessories with a 15° tilt

for the S15D sensor modules.

Size of the Drilling Holes with Dierent Material Thicknesses

Material thickness a Diam. of drilling hole b

mm in mm in

5 0.20 47 1.85

10 0.39 48 1.89

15 0.59 50 1.97

20 0.79 51 2.01

25 0.98 52 2.05

30 1.18 53 2.09

35 1.38 55 2.17

40 1.57 57 2.24

40mm/

1.6in

Multiple extensions can be added (EN 50155 vibration resistance was tested

with one extension added)

Best image quality

with wall-mounting

with 15° wedge

2.50 to 3.50m/8.2 to 11.5ft

Camera focus (best image quality)– optimized with 15° wedge

40mm/

1.6in

40mm/

1.6in

40mm/

1.6in

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 163 164

Sem comentários

Mobotix S15 Especificações Página 75