Mobotix M22M Informações Técnicas descarregar pdf (Página 38)

3.3 Connecting the Camera

Make sure that you only use switches or routers that support the 10/100 Mbps

Ethernet interface of the camera and check the LED activity of the corresponding

port of the switch or router. For additional information on this topic, see section 4.11,

Operating Many Cameras

, in the

Software Manual

3.3.1 Power Supply Using MOBOTIX Products (Network Power Adapter)

1) Connect the Camera connector of the Network Power Adapter (NPA) to the

NET connector of the camera.

2a) Connecting to an Ethernet switch or router:

• Connect the LAN/Power connector of the NPA to an Ethernet connector of

the switch/router or the Ethernet wall outlet.

• Plug the RJ45 connector of the external power unit into the PC/Power

connector of the NPA.

2b) Connecting directly to a computer:

• Connect the PC/Power connector of the NPA to the Ethernet port of the

computer.

• Plug the RJ45 connector of the external power unit into the LAN/Power

connector of the NPA.

www.mobotix.com • [email protected] • 31.1.2007

36/56

M22M Camera Manual Part 1

The Network Power

Adapter replaces the

crossover cable when

directly connecting to a

computer

The NPA can eliminate a

crossover cable that may

be hard to obtain

Network Power

Adapter

Network Power

Adapter

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 59 60

Sem comentários

Mobotix M22M Informações Técnicas Página 38