Mobotix M22M Informações Técnicas descarregar pdf (Página 31)

2.7.8 Changing Lenses

As described in section 2.7.5,

M14 Fixed Lenses

the M22M can be fitted with several MOBOTIX

lenses. Proceed as follows to change a lens:

• Unmount the lens cover by turning it

counter-clockwise.

• Loosen the lens' lock ring (if fitted) by turn-

ing it counter-clockwise.

• Remove the lens with the lock ring by turn-

ing it counter-clockwise.

• Unscrew the lock ring (if present) from the

lens you just removed and screw it onto

the new lens.

• Screw the new lens with the lock ring (if present) back into the camera.

• If necessary, restore the power supply of the camera.

• Adjust the image sharpness according to the camera's live image on the

computer monitor.

• Tighten the lock ring by turning it in clockwise direction.

This procedure is the same for the M22M-Secure-CSVario and CS/C mount

lenses, albeit without the lock ring (not installed).

29/56

M22M Camera Manual Part 1

Attention: Protection

class IP65 will only be

reached with mounted

lens cover

Check image sharpness!

www.mobotix.com • [email protected] • 31.1.2007

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 59 60

Sem comentários

Mobotix M22M Informações Técnicas Página 31