Mobotix D12 Informações Técnicas descarregar pdf (Página 61)

(2) Removing the cable cover

Remove the 4mm Allen screws of the cable cover and detach the cover.

Note: If the cable cover cannot be detached

by hand, take a screwdriver to lift it out of its

seat. Insert the screwdriver into the grooves

shown below and

gently lift the cable

cover.

(3) Removing the Ethernet and ISDN cables

Remove the cables one by one by gently

pressing down the lock and pulling each

cable out of its socket. Now take the cables

out of the cable guides at the bottom of the

casing and remove them through the

appropriate holes in the casing. Take care to

avoid any damage to the cable guides at

the bottom of the camera casing (see

figure

(4) Removing the dome

Take a cotton cloth and remove the

transparent dome by turning it in a counter-

clockwise direction.

www.mobotix.com • [email protected] • 23.11.2006

59/96

D12 Camera Manual Part 1

3mm Allen wrench is

included in the delivery

Dismount the dome by

turning it counter-

clockwise

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 99 100

Sem comentários

Mobotix D12 Informações Técnicas Página 61