Mobotix T24 Informações Técnicas descarregar pdf (Página 86)

86/118

T24 System Manual Part 2: System Expansion With MxEasy

www.mobotix.com • [email protected]

Step 5: Skip The Camera Access Dialog

It is no longer necessary to enter a new password or user name because the supervisor

PIN has already changed the default access data and the system is therefore securely

encrypted. Click Continue without completing the ﬁelds. The next window, Specify Door

Station Equipment, opens.

Step 6: Specify Door Station Equipment

The T24 includes a ﬁxed bell button on the camera module and – if it exists for your system

– one on the Keypad. These two bell buttons have the same function and are already

integrated into the system during auto-configuration. The presence of additional equip-

ment bell buttons (e.g., third-party module with 1 to 4 buttons) is recognized by the

system during auto-configuration. Select the actual number of doorbells being used,

without counting the fixed bell button on the camera module.

Check whether the door sensors in the system are activated and the connection terminals

are correctly assigned, in order to obtain correct door status displays (Door open/closed/

locked) in MxEasy. To designate the door sensor connections see also Section 2.3.4 of this

manual (Set Door Status Display).

Conﬁrm your settings by clicking Continue. The Deﬁne Bells window opens.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 119 120

Sem comentários

Mobotix T24 Informações Técnicas Página 86